NDUPRESS® stands for more than 40 years of tradition and experience in the field of complete equipment of garment factories worldwide. Its family business is your renowned partner for the production and processing of clothing.
IPN-TF-24 / Tunnel finisher
The INDUPRESS® high performance finishing device is constructed in modular version and can be assembled and operated in optimum way for different performance requirements and therefore offers an universal field of application for all garments like blouses, skirts, dresses, coats, trousers, anoraks, clothing for children, T-shirts, sweatshirts, sportswear, pad clothing, thermo jackets and so on.
In the steam modules the garments absorb enough steam to achieve good results even at high speeds. Also at garments made out of natural fibre. The fabrics (fibres) get softened with a measured and well directed amount of steam. In the next step the fabrics will be treated from top to bottom with air, fluid flow speed and temperature. All parameter can be adjusted individually and steplessly. A good finishing result can be achieved by a well balanced programming and exact dosage of the influential finishing parameter for different materials. All finishing parameter (temperature, steam quantity, steam quality) can be adjusted individually per chamber. Very energy saving because of automatic switching to Standby operation, if no garments will be feeded as well as perfect, high-class, mineral fully insulation.
IPN-HD-23-15B / sleeve finishing (Setting and finishing of sleeves)
Special pressing machine for setting and finishing of sleeves on men’s jackets with patented, pneumatic variable body for small and big sizes, adjustable to three size ranges (e.g. 46-50, 52-56, 58-64 and bigger) as well as three changeable sets of setting stamps for this three size ranges in addition one set of setting stamps for extremely small sizes and armholes.
Also the shoulder obliquity of the jacket body is variable, easy mechanical, adjustable in order to hang up the jacket perfect fitting to the model and order to justify the balance. The upper sleeve finisher which is mounted on the top of the machine frame can pass completely around the sleeve in three axes as well as rotary motion and so completely finish the sleeve. These movements can be programmed variable. A very flexible, to all directions adjustable side part holder supports the exact positioning of the jacket. Because of the back part holder with pneumatic positioning you will get a flat back at the armhole.
IPN-VHD-23-14B / shoulder pads (Fusing in of shoulder pads and form-pressing of shoulder)
Special pressing machine for fusing in of shoulder pads and form-pressing of shoulder. Because of accurately fitting pressing shapes the shoulder padswill be pressed perfectly and the shoulder will be perfectly in form. You can process different heights of shoulder pads through electropneumaticdjustment of the lower shapes (9 steps each 2mm, to be selected on the Touchscreen).
